Minn Kota electric boat motors

The superior durability and long lasting performance of the all new and improved Riptide is also available for the back of the boat. Available in 4 models, all our transom mount motors are 12 volt and range from 40 to 55 lbs thrust. They feature an enhanced corrosion protection, 'sacrificial anode' system and all the rugged reliability you expect from Minn Kota. With the 'Push to Test' battery meter you get an instant state of charge reading at the push of a button. Rebuilt with an intuitive, easy-to-use design, the all-new Riptide Transom delivers up to 55 pounds of power and precision manoeuverability. With a push-to-test battery meter, the battery-extending power of Digital Maximizer (on select models) and unmatched corrosion protection, Riptide Transom means fish are out of places to hide

NO ONE WILL BEAT THIS BUNDLE. You get the RT45 above in a 36" shaft, a 50 AMP Lithium 12v battery as well as the Lithium charger to suit. The battery weighs just 7Kgs and the dimensions are 280mm long by 230mm high by just 100mm wide.

The Minn Kota Riptide I-PILOT Bowmount has been a popular unit for ages and whilst the original model was just available with a corded foot control it can now be purchased with I-PILOT. When you go to this model you do not get the foot pedal but rather the Bluetooth handheld remote. With I-PILOT and the hand held remote boat positioning becomes automatic. Set Spot-Locks, record paths, control speed, steering and more all from the palm of your hand. Its available in 55lb 12 volt or 70lb 24 volt thrust both in a 54" shaft length. 

The main features of the RT55 are the new and improved deploy assist lever and the Digital maximizer. DEPLOY ASSIST LEVER - Get optimized saltwater performance with Riptide’s re-engineered electric steer control, new deploy-assist lever, and a host of features that set the standards for power and control. Riptide Powerdrive’s new deploy assist lever puts you in motion and in pursuit of fish quickly and easily. Simply depress the lever to deploy the motor and you’re ready to go. When it’s time to move, it stows easily and securely – ready for action again as soon as you are. DIGITAL MAXIMIZER - Up to five times longer run time on a single charge. Standard on the Riptide Powerdrive Bowmount model.

Upgrade your Salwater Bowmount I-PILOT motor (2017 models and newer) with the Minn Kota Heading Sensor. It recognises changes in the boat's heading due to wind and current, and communicates with the I-PILOT system to minimise boat swing for a more accurate, stronger hold. The optional heading Sensor will also allow the jog mode on your Saltwater motor.You MUST watch this video to calibrate your heading sensor once installed. CLICK HERE TO WATCH VIDEO.

With a new one touch launch bracket, the Riptide Terrova Saltwater Advanced I-Pilot powerhouse features better performance, I-PILOT as standard and a new foot pedal option. New stow/deploy mechanism now with lift assist lets you move effortlessly in and out of the water. The I-PILOT is available in 6 models across 12, 24 and 36 volt options. Simply depress the handle and fall-away ramps effortlessly deploy the motor into the water. The balanced motor design makes stowing easy, and a special master cut-off switch automatically turns the power off when stowed. Includes Hand Held Remote and Heading Sensor.

IF YOU WANT THE DEAL OF THE YEAR THEN THIS IS IT. For a limited time at Hunts Marine we have the 55lb 60" Terrova above available as a package. Comes with the heading sensor, hand held remote, 50 amp circuit breaker, 70 amp 3 pin genuine power plug, quick release bracket, lock for quick release bracket and shaft stabiliser. Note: The package is available via an internet order and we will send it out (freight additional) or pickup from our Sydney store only.

Available in 2 sizes, the Minn Kota Riptide Terrova with I-LInk is the exact same engine as the standard Terrova however the I-Link feature lets you control the motor from your Humminbird fishfinder or its new touch-screen remote. It includes our new, most accurate Spot-Lock ever, every i-Pilot feature, and the ability to follow depth contours, save and retrace your Humminbird Current Track, and return to productive waypoints.

This Ethernet Cable adaptor is for Humminbird Helix units to be able to connect to I-Link Minn Kota engines. It adapts the 8 pin round cable end to the 5 pin plug on the sounder.  

Manual Deploy Terrova QUEST is here. No longer do you have to choose between a 24v or 36v motor as they are now one and the same. Just choose your shaft length and colour and then simply use a 24v or a 36v battery and you will get 90lbs of thrust from the 24v battery and 115lbs of thrust from the 36v battery. All engines now have a built-in heading sensor. Riptide Terrova QUEST is the hardest working first mate you’ll meet. One that doesn’t take breaks and doesn’t know the meaning of the term “day off”. With available shaft lengths up to 100”, Riptide Terrova QUEST comes ready to go where other trolling motors wont. The new QUEST series of dual 24/36 volt brushless trolling motors was designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever and even an eco mode to extend battery life, Terrova is ready to tackle the elements and feels right at home on bigger boats than ever before.

QUEST Series: These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.

Auto Deploy Instinct QUEST is here. No longer do you have to choose between a 24v or 36v motor as they are now one and the same. Just choose your shaft length and colour and then simply use a 24v or a 36v battery and you will get 90lbs of thrust from the 24v battery and 115lbs of thrust from the 36v battery. All engines now have a built-in heading sensor. With available shaft lengths up to 100” and the most dependable automatic stow and deploy ever built, Instinct comes ready to go where other trolling motors won’t. The new QUEST series of dual 24/36 volt brushless trolling motors was designed for anglers who demand the best from their equipment – even in the harshest environments. With a reinforced motor and mount, more advanced GPS functionality than ever and even an eco mode to extend battery life, Instinct is ready to tackle the elements where the waves are high – and so are the stakes.

QUEST Series: These 24/36V dual-voltage brushless motors have been completely re-imagined from the ground up with updates to mounts, propellers, lift assist systems, drive motors and software – taking the world’s greatest trolling motors and redesigning them to outperform everything else on the water for years to come.

With auto stow and deploy and power trim, the saltwater Ulterra is available in 4 models with 80lb and 112lb thrust and with shaft lengths from 60" to a massive 72" to cater for the offshore angler who wants to hold those off-shore marks. Standard features of the Ulterra include a reinvented spot lock to hold you tighter to your fishing spot, new heading sensor, I-Pilot hand held remote, power trim and an optional foot pedal. CLICK HERE to see a great bunch of videos on how to use your Minn Kota Ulterra.

The Talon Anchor System is designed to quickly and quietly stop and position your boat in depths down to 15ft – whether you’re fishing saltwater or freshwater, the Talon is the ultimate holding device for stealth fishing. Operating from the boat’s existing battery setup, the Talon vertically deploys its three stage telescopic spike with the wireless remote and without the fish-spooking noise of a traditional anchor. When not in use, the lightweight Talon can be taken off the boat thanks to its standard release bracket or folded away for garaging with the optional tilt bracket. It’s electro-mechanical, cable-driven design, is easy to install with minimal wiring & rigging. A wireless remote is supplied as standard and you can purchase the optional foot control. The Talon is available in 4 sizes with different colour combos for each one. Select  your desired model in the drop down menu to see options. Popular features include: Multiple Control Options: Control Talon from anywhere on the boat using your choice of options: Control Panel, Wireless Remote, Foot Switch, i-Pilot or i-Pilot Link Remote, Mobile App or right from the Humminbird fish finder. Separate anchoring modes for Rough Water (heavy wind and chop), Soft Bottom (muddy or silted bottom), and standard (normal anchoring). Built-in Work Light: Illuminate the boat transom any time of day — or night. Includes two colors (white and blue) and each has three brightness intensity settings. Indestructible Anchoring Spike: Strong and flexible composite anchor spike backed with a lifetime guarantee and the Vertical Deployment keeps the Talon out of the way of your fishing lines.

The Minn Kota Talon tilt bracket is made from marine grade, anodized aluminum and accommodates for low clearance areas and boat storage. Features adjustable deck support for added stability while tilting.

Suits 12V Motors up to 60" shaft length. Allows for easy removal of any Riptide bow mount, autopilot motor. The low profile puck design leaves the deck clear when the motor is removed. Includes stainless steel hardware to bolt the plate to the Minn Kota (but not puck to the boat as length of bolts unknown) and locking pin, locking handle can be secured with a padlock (not included).

A lot of people buy this so they can mount it on the wall of their garage and then you can hang your Minn Kota bow mount away safely and securely when not in use on your boat. It Suits the Quick release bracket above.

Replacement pin to suit quick release bracket above.

This stainless lock fits over the centre pin in the quick release bracket above and instead of using a small padlock you can use this secure barrel lock that is almost impossible to cut off as it full shrouds the pin. Comes with 2 keys.

Designed to meet the increased stress created by high thrust motors and long shaft lengths. Constructed of marine grade nylon and with a black painted stainless steel quick release pin to resist rust, corrosion and discolouration. Locking handle can be secured with a padlock (not included) for additional security. 

Replacement pin to suit the heavy duty quick release bracket above.

Designed to suit the new model larger QUEST motors, it's larger than the two existing brackets and is made from a High-yield composite construction which is super strong and impervious to corrosion.  It's specifically designed for higher thrust motors and longer shaft lengths. The Low-profile design leaves the deck clear when the motor is removed. Locking handle with stainless steel pins can be secured with padlock (padlock not included). Available in Black or White.

This heavy duty alloy plate is designed to be used to either help strengthen the deck of a boat for fitting the new Quest engines or it can be bolted on to where a previous Minn Kota was fitted and then the new Quest is fitted to the plate. Designed for Saltwater and measuring 380mm by 245mm and12mm thick, its made from black anodised aluminium plate and provides additional strength, stability and versatility for mounting the Minn Kota QUEST series Riptide Instinct, Ulterra, Terrova, and Riptide Terrova trolling motors. It has multiple mounting hole patterns for super flexible installation and includes all the stainless hardware that you are likely to need. Can be used with the QUEST and Heavy Duty Quick release mounting brackets as well.

The Minn Kota Stabiliser is designed to reduce bounce on bow-mount trolling motors. It's equipped with a low profile base that allows the stabiliser to be easily folded down or removed when not in use. The pole can be cut down to suit the required height and it suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.

This is the genuine Minn Kota replacement strap for the head stabiliser above. 

The RAM tough claw with round base consists of the small Tough-Claw base, double socket arm and round 6cm base adapter. The Tough-Claw can be clamped on rails from 0.625" - 1.5" outer diameter and the overall maximum height from the bottom of round base (deck of boat) to the Minn Kota shaft is approx 25cm. The round base adapter contains the industry standard universal hole pattern, which will connect to a large variety of RAM Mount and third party cradles or just screw it straight down to a flat surface. The mount is designed with a RAM 1.5" diameter patented rubber ball and socket system that has adjustment points at both ends of the double socket arm thus allowing for almost infinite adjustment. Suits all RipTide, Ulterra, Terrova and PowerDrive bow mount engines.